As the material enters the feed throat near the rear of the barrel it comes in contact with the screw. The rotating screw forces the plastic resin forward into the barrel that is heated to the desired melt temperature depending on the resin. In most processes, a heating profile is set for the barrel utilizing three or more independent PID (proportional-integral-derivative controller) controlled heat zones that gradually increase the temperature of the barrel from the rear where the resin has entered to the front. This allows the plastic resin to melt gradually as it is pushed through the barrel and lowers the risk of overheating which may cause degradation in the polymer.
2. Product specification of plastic led profile.
|
Material |
Polycarbonate |
|
Size |
25 mm wide |
|
color |
clear, semi-clear, opal |
|
design |
Standard size or custom made sizes |
|
Length |
From 0.5meter to 5 meters length |
|
packing |
Carton packing or wooden box packing |
Applications:
Led Lighting cover/lens.
Electronic components.
Construction material.
4. Product pictures:
Hot Tags: plastic led profile, China, suppliers, manufacturers, factory, customized, buy, made in China
